Interior
Well I stripped the interior of the car in order to see if there was any work needing to be done, ie holes in the floor. For it's age it is in pretty good shape, I only found one small hole in the floor in the passenger footwell. I've welded a plate in and am now going to put the interior back together, cleaning it up as I go. I've treated the seats with leather cleaner and conditioner, and restitched the drivers seat base. Here I will show some photo's from this strip.
 "A view showing the hole in the floor")
Here is a shot of the passenger footwell showing the small area that was rusty and holed.
 "A closer view of the damaged area")
A closer shot of the damaged area. It is hard to see how big the hole is, but it's not as big as the rust.
 "Showing the floor after patching")
Here you can see the floor patched.
 "A closer shot of the repair")
And here's a closer view.
 "A view across the interior, you can just see that the drivers side of the car floor has already been patched")
You can makeout here that the drivers side floor panel has already been patched.
 "A shot showing the dash")
A shot across the car showing the dash.
 "A view of the door, not a great deal of rust on this")
Showing the drivers door. There is not too much rust at the bottom of the door, which is where the doors can suffer.
 "Showing the rear floor which is solid")
This shot shows the rear floor which is nice and solid.
 "The drivers side rear quarter panel")
The drivers side rear quarter panel. Nice and solid.
I don't have any pictures, but the passenger side quarter panel is a replacement panel. This had not been fitted very well and was rusty and holed at the bottom. I needed to get a good repair done to this to ensure it was nice and waterproof and solid.
